[Synchro Scan]

Fine-adjust the shutter speed to reduce flickering and horizontal stripes.

The shutter speed set in Synchro Scan is saved separately from the shutter speed used for normal recording. In the Synchro Scan setting screen you can call up the current shutter speed for normal recording and adjust it.

1Set the exposure mode to [S] or [M].

[MENU/SET] arrow_menu [menuicon_video] arrow_menu [menuicon_imagequality] arrow_menu [Exposure Mode] arrow_menu [S] / [M]

sc_cap_video_mode_s

 

2Set [Synchro Scan].

[MENU/SET] arrow_menu [menuicon_video] arrow_menu [menuicon_imagequality] arrow_menu [Synchro Scan] arrow_menu [ON]

sc_cap_video_synchroscan

 

3Set the shutter speed.

Rotate icon_controldial to select a numeric value, then press [MENU/SET].

You can call up the current shutter speed for normal recording by pressing [Fn1].

Adjust the shutter speed while looking at the screen so that flickering and horizontal stripes will be minimized.

sc_ill_synchroscan_ss_adjust