Specifications

The specifications are subject to change for performance enhancement.

It is possible to record photos (still images) using software “LUMIX Tether”.

 

Digital camera body (DC-BGH1):

Information for your safety

Power source:

12 V spec_pic_dc

 

Power consumption:

7.9 W (when recording), 6.7 W (when playing back) [When the interchangeable lens H-ES12060 is attached.]

 

Type

Type

Digital Single Lens Mirrorless camera

Recording media

SD memory card / SDHC memory card*1 / SDXC memory card*1

*1Compliant with UHS-I/UHS-II UHS Speed Class 3, UHS-II Video Speed Class 90

Double slot recording function is available.

Lens mount

Micro Four Thirds mount

Image sensor

Image sensor

4/3″ Live MOS sensor, a total of 11,930,000 pixels, primary color filter

Effective number of pixels of the camera

10,280,000 pixels

Latitude

13 stops ([V-Log L])

Recording format for video

Video format

MP4 (H.264/MPEG-4 AVC, H.265/HEVC)

MOV (H.264/MPEG-4 AVC, H.265/HEVC)

Audio format

MP4: AAC (2ch)

MOV: LPCM (2ch, 48 kHz/16 bit)*2

*2When an XLR Microphone Adaptor (DMW-XLR1: optional) is attached, LPCM (2ch, 48 kHz/24-bit, 96 kHz/24-bit) can be selected

Image quality for video

Refer to [Rec Quality] in this document. ([Rec Quality])

Recording format for still images

File format for still images

JPEG (DCF compliant, Exif 2.31 compliant)

Image size (pixels)

L: 3680×2760

M: 2592×1944

S: 1824×1368

(The aspect ratio is fixed to [4:3].)

Image quality for photos

Fine / Standard

Focus

AF type

TTL type based on image detection (Contrast AF)

Focus mode

AF / MF

AF mode

Automatic detection (Face/Eye/Body/Animal) / Tracking (only for video) / 225-Area / Zone (Oval) (only for video) / 1-Area

Exposure control

Light metering system, Light metering mode

1728-zone metering, multi-metering / center-weighted metering / spot metering / highlight-weighted metering (only for video)

Metering range

EV 0 to EV 18

(F2.0 lens, ISO100 conversion)

Exposure

Program AE (P) / Aperture-Priority AE (A) / Shutter-Priority AE (S) / Manual Exposure (M)

Exposure compensation

1/3 EV steps, ±3 EV (Videos), ±5 EV (Photos)

ISO sensitivity

(standard output sensitivity)

AUTO / 160 to 51200, When [Extended ISO] is set: AUTO / 80 to 204800, 1/3 EV steps

Dual Native ISO setting

Auto

Base sensitivity: 160/800 (dB display values are based on 160)

AUTO / 160 to 51200

When [Extended ISO] is set: AUTO / 80 to 204800

Low sensitivity

Base sensitivity: 160

AUTO / 160 to 800

When [Extended ISO] is set: AUTO / 80 to 800

High sensitivity

Base sensitivity: 800

AUTO / 800 to 51200

When [Extended ISO] is set: AUTO / 800 to 204800

Dual Native ISO setting

([V-Log L])

Auto

Base sensitivity: 400/2000 (dB display values are based on 400)

AUTO / 400 to 25600

Low sensitivity

Base sensitivity: 400

AUTO / 400 to 2000

High sensitivity

Base sensitivity: 2000

AUTO / 2000 to 25600

Dual Native ISO setting

([Hybrid Log Gamma])

Auto

Base sensitivity: 320/1600 (dB display values are based on 320)

AUTO / 320 to 51200

When [Extended ISO] is set: AUTO / 320 to 204800

Low sensitivity

Base sensitivity: 320

AUTO / 320 to 1600

High sensitivity

Base sensitivity: 1600

AUTO / 1600 to 51200

When [Extended ISO] is set: AUTO / 1600 to 204800

White balance

AWB / AWBc / AWBw / Daylight / Cloudy / Shade / Incandescent lights / White set 1, 2, 3, 4 / Color temperature 1, 2, 3, 4

Shutter

Shutter speed

Videos: 1/2 of a second to 1/16000 of a second

Photos: 1 second to 1/16000 of a second

Zoom

Digital Zoom

2x / 4x

Microphone

Stereo

Interface

[REMOTE]

Ø2.5 mm jack

Terminal for generic remote control unit

(A Panasonic shutter remote control (DMW-RS2) cannot be used.)

[DC IN 12 V]

DC 12 V (11.4 V to 12.6 V), EIAJ Type 4

[MIC]

Ø3.5 mm stereo mini jack

Headphones

Ø3.5 mm stereo mini jack

LAN connector

LAN terminal (RJ-45) for remote control×1, compatible with power supply by PoE+ (IEEE 802.3at compliant)

Use an IEC60950-1 or IEC62368-1 compliant PoE+ (IEEE 802.3at compliant) switching hub or power supplying device.

[SDI OUT]

BNC terminal×1, 0.8 V [p-p], 75 Ω, 3G-SDI Level-A / HD-SDI compatible

[TC IN/OUT]

BNC terminal×1

[GENLOCK IN]

BNC terminal×1, BBS (Black Burst sync) signal and tri-level sync signal compatible

HDMI

HDMI Type A

USB

USB Type-C™, SuperSpeed USB3.1 GEN1

External dimensions / Mass

External dimensions

Approx. 93.0 mm (W)×93.0 mm (H)×78.0 mm (D)

(3.66″ (W)×3.66″ (H)×3.07″ (D))

(excluding the projecting parts)

Mass (Weight)

Approx. 545 pic_gram / 1.2 lb (only camera body)

Operating environment

Recommended operating temperature

-10 °C to 40 °C (14 °F to 104 °F)

Battery performance temporarily worsens at low temperatures (-10 °C to 0 °C (14 °F to 32 °F)), reducing the available recording time.

Permissible relative humidity

10%RH to 80%RH

Wi-Fi

Compliance standard

IEEE 802.11b/g/n (standard wireless LAN protocol)

Frequency range used (central frequency)

2412 MHz to 2462 MHz (1 to 11 ch)

Encryption method

Wi-Fi compliant WPA™/WPA2™

Access method

Infrastructure mode

Bluetooth

Compliance standard

Bluetooth Ver. 4.2 (Bluetooth Low Energy (BLE))

Frequency range used (central frequency)

2402 MHz to 2480 MHz

 

AC adaptor (Panasonic SAE0011A):

Information for your safety

Input:

100 V - 240 V spec_pic_ac 50/60 Hz 1.2 A

79 VA (100 V spec_pic_ac) - 99 VA (240 V spec_pic_ac)

 

Output:

12 V spec_pic_dc 3.0 A

 

The symbols on this product (including the accessories) represent the following:

spec_pic_acAC

spec_pic_dcDC

spec_pic_class2Class II equipment (The construction of the product is double-insulated.)

spec_pic_onON

spec_pic_stand-byStand-by

 

This camera complies with the “Design rule for Camera File system” (DCF) and “Exchangeable Image File Format” (Exif) standards established by “Japan Electronics and Information Technology Industries Association” (JEITA). The camera cannot playback files that do not comply with the DCF standard. Exif is a file format for still images which allows recording information, etc. to be added.