Table of contents

Control reference guide

Remote control

MST60

1Turn the unit on and off

2TV operation buttons

You can operate the Panasonic TV using the unit’s remote control. Some buttons may not work depending on the TV.

[ TV] : Turn the TV on and off

[AV] : Change input

[  VOL] : Adjust the volume

3Enter numbers or characters

4Cancel

5Basic playback control buttons  “Operations during playback”

6Show Top menu  “Show top menu”

7Show Miracast™ screen  “Using Miracast™”

8Show Option menu  “Option menu”

9Colored buttons (red, green, blue, yellow)
Used for various purposes depending on the display.

10Transmit the remote control signal

11Show status messages  “Show the status messages”

12Show Setup menu  “Setup menu”

13Select audio  “Changing audio”

14Show the Home screen of the Network Service

15Exit the menu screen

16Show Netflix screen  “Network Service (Enjoying Netflix, etc.)”

17Show HOME menu  “HOME menu”

18[] : Move the highlight for selection

[OK] : Confirm the selection

19Return to previous screen

 

MS10

1Turn the unit on and off

2TV operation buttons

You can operate the Panasonic TV using the unit’s remote control. Some buttons may not work depending on the TV.

[ TV] : Turn the TV on and off

[AV] : Change input

[  VOL] : Adjust the volume

3Enter numbers

4Cancel

5Select audio  “Changing audio”

6Basic playback control buttons  “Operations during playback”

7Show Top menu  “Show top menu”

8Show Miracast screen  “Using Miracast™”

9Show Option menu  “Option menu”

10Colored buttons (red, green, blue, yellow)
Used for various purposes depending on the display.

11Transmit the remote control signal

12Show status messages  “Show the status messages”

13Show Setup menu  “Setup menu”

14Show Home Network menu  “Home Network feature”

15Show the Home screen of the Network Service

16Exit the menu screen

17Show Netflix screen  “Network Service (Enjoying Netflix, etc.)”

18Show HOME menu  “HOME menu”

19[] : Move the highlight for selection

[OK] : Confirm the selection

20Return to previous screen

 

The Unit

Front View

 

 

 

Rear View

 

1Remote control signal sensor

Distance: Within approx. 7 m (23 feet)

Angle: Approx. 20° up and down, 30° left and right

2POWER LED

Blinks when the power is turned on.

Wait for the LED to turn solid green before using this unit.

3INFO LED  “LED indicators”

Displays the various states of this unit.

4USB port  “Playing back USB devices”

5DC IN terminal  “Connecting to the AC adaptor”

6LAN port  “LAN cable connection”

7HDMI AV OUT terminal  “Connecting to a TV”

8Standby/on switch (POWER /I)  “Easy Settings”

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit still consumes a small amount of power.

Connections & Settings

Table of contents