Table of contents

Setup menu

Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.

Some items in the Setup menu are common to the Option menu. You can get the same effect with both menus.

 

About Multi User Mode

: Settings of the items with this indication are saved by the respective users registered in the HOME menu.

Please refer to “Multi User Mode” for details about user registration and switching.

 

1While displaying the HOME menu, press [SETTINGS].

 

e.g., MST60

2Select an item and change the settings.

 

To exit the screen

Press [HOME].

 

Video
Picture Mode  “Picture Mode”

 

Picture Adjustment  “Picture Adjustment”

 

HDMI Output

Press [OK] to show the following settings:

 

HDMI Resolution

The items supported by the connected devices are indicated on the screen as “”. When any item without “” is selected, the images may be distorted.

If “Auto” is selected, the best suited output resolution to the connected TV is automatically selected.

To enjoy high-definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition TV). If this unit is connected to an HDTV through other equipment, the other equipment must also be 1080p compatible.

 

 

MST60

HDMI Color Mode

This setting is for selecting color-space conversion of the image signal.

 

Deep Color Output

This setting is for selecting whether to use Deep Color output when a TV that supports Deep Color is connected.

 

Contents Type Flag

Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this function is connected.

 

Audio
Dynamic Range Compression

You can listen at low volumes but still hear dialog clearly.

(Dolby® Digital and Dolby® Digital Plus only)

 

Digital Audio Output

Press [OK] to show the following settings:

 

Dolby D/Dolby D +
DTS

Select the audio signal to output.

Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.

Not making the proper settings may result in noise.

 

Downmix

Select the downmix system of multi-channel to 2-channel sound.

Select “Surround encoded”, when the connected equipment supports the virtual surround function.

The downmix effect is not available when “Digital Audio Output” is set to “Bitstream”.

 

MST60

3D
3D Playback Precautions

Set to display or hide the 3D viewing warning screen when playing back 3D images.

 

Pop-Out Level  “Pop-Out Level”

 

Language
Subtitle Text

Select a suitable item according to the language used for MKV/Xvid For Canada subtitles text.

This item is displayed only after playing back a file.

 

On-screen Language

Choose the language for menus and on-screen messages.

 

Network
Easy Network Setting  “Easy Network Setting”

 

Network Settings

Perform network-related settings individually.

Press [OK] to show the following settings:

 

LAN Connection Mode

Select the LAN connection method.

Select “Wireless Master” when you make a direct wireless connection between this unit and a Home Network device. Internet connection is not available when this item is selected.

 

Wireless Settings

This allows the wireless router and connection settings to be set. Current connection settings and connection state can be checked.

 

Connection Setting

The wireless router connection wizard will be displayed.

 

Double Speed Mode Setting (2.4GHz)

Set the connection speed for a 2.4 GHz wireless format.

If you connect using the “Double Speed Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or become unstable.

 

IP Address/DNS Settings

This is for checking the state of the network connection and setting the IP address and DNS-related.

Press [OK] to show the respective setting.

 

Proxy Server Settings

This is for checking the state of connection with the Proxy server and performing settings.

Press [OK] to show the respective setting.

Network Service Settings  “Network Service (Enjoying Netflix, etc.)”

Press [OK] to show the following settings:

 

Time Zone

Set the unit’s time to match your location.

Some Network Service contents require the time zone to be set. Set the time zone if necessary.

 

DST

Select “On” when using Daylight Saving time.

 

Network Drive Connection

It is possible to access the shared folder of equipment not compatible with DLNA, such as the Windows XP operating system, and play back video, still pictures, and music on this unit.

For the setting and operation method of connected equipment, refer to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

 

Remote Device Settings  “Using the Digital Media Controller”

Press [OK] to show the following settings:

 

Remote Device Operation

Enable to operate by DMC.

If “On” is selected, “Quick Start” will be activated.

 

Setting Unit Name

Set the name of this unit to be displayed on the connected equipment.

 

Registration Type

Auto

Allow connection to all the equipment accessing this unit.

Manual

Set the permission for individual equipment connections accessing this unit.

 

Remote Device List

Registering/deregistering of the displayed equipment can be performed when “Manual” in “Registration Type” is selected.

Ratings

The following item uses the password.

Don’t forget your password.

 

Network Service Lock

You can restrict the usage of Network Service.

 

System
Easy Settings

You can execute basic settings.

 

Display Settings

Press [OK] to show the following settings:

 

TV Aspect

Set to match the type of TV connected.

 

When connected to a 4:3 aspect TV and playing 16:9 ratio image:

4:3 Pan & Scan

The sides are cut off so the picture fills the screen.

4:3 Letterbox

Black bands appear at the top and bottom of the picture.

 

When connected to a 16:9 widescreen TV and playing 4:3 ratio image:

16:9

Video is displayed as a 4:3 ratio image in the center of the screen.

16:9 Full

Video is displayed as a horizontally stretched 16:9 image.

 

 

Screen Saver Function

This is to prevent image retention on the screen.

When this is set to “On”:

If a list of playback content is displayed and there is no operation for 10 minutes or more, the screen switches to HOME menu automatically.

While playing and pausing, etc., this function is not available.

 

Status Messages

Choose whether to show status messages automatically.

 

HDMI CEC

Set to use “HDMI CEC” function when connected to a device that supports “HDMI CEC”.

Select “Off” when you do not want to use “HDMI CEC”.

Edit User Information

Change the user information registered in the HOME menu.

 

Start-up Banner

Select whether to display the banner after turning on this unit.  “HOME menu”

 

Quick Start

Speed of start-up from standby mode is increased.

When set to “On”, the internal control unit will be powered and the idle power consumption will increase compared to when set to “Off”. (About the power consumption  “Specifications”)

 

Remote Control Code

Change the remote control code if other Panasonic products react to this remote control.

 

Firmware Update  “Firmware updates”

Press [OK] to show the following settings:

 

Automatic Update Check

When this equipment remains connected to the Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary.

 

Update Now

You can update the firmware manually if a firmware update is available.

 

System Information

Press [OK] to show the following settings:

 

License

Information about the software used by this unit is displayed.

 

Firmware Version Information

Display firmware version of this unit and wireless LAN module.

 

 

Restore Default Settings

This returns all values in the Setup menu and the Option menu to the default settings, except for some settings of network, ratings, remote control code, language, etc.

 

Reference

Table of contents