LED indicators
Error states are indicated by the INFO LED.
Confirm the following items in correspondence to the state of INFO LED of this unit.
If the state of the INFO LED does not change after performing the operations in the table below, contact your local Panasonic dealer.
INFO LED
|
INFO LED state
|
Description
|
|
Flashes 6 times
|
The remote control and this unit are using different codes.
Turn on this unit by using the standby/on switch on this unit, and check “Remote control  ”, which is displayed on the screen when you press a button on the remote control.
Press and hold [OK] and the displayed number (“”) for more than 5 seconds.
|
|
Lights up
|
The USB device is drawing too much power. Please disconnect or remove the USB device from the unit.
The USB device may be incompatible.
|
Table of contents
