[LAN / Wi-Fi Setup] menu

This configures the settings required for the wired LAN / Wi-Fi function. The settings cannot be changed when connected to wired LAN / Wi-Fi.

 

1Displaying the [LAN / Wi-Fi Setup] menu.

[MENU/SET] arrow_menu [menuicon_setup] arrow_menu [menuicon_in_out] arrow_menu [LAN / Wi-Fi] arrow_menu [LAN / Wi-Fi Setup]

Cannot be set during connection via USB.

[IP Address Setting (LAN)]

Set the IP address for wired LAN connection. You can select whether to automatically assign an IP address using a DHCP or to set any fixed IP address.

[DHCP Server]:

Select this to connect the camera as a DHCP server (default setting).

[DHCP Client]:

Select this to connect the camera as a DHCP client.

[Static IP Address]:

Select this to connect using the IP address set in [Static IP Address Setting].

[Static IP Address Setting]:

You can set IP address used for [Static IP Address].

[IP Address]: The default setting is <192.168.0.2>.

[Subnet Mask]: The default setting is <255.255.255.0>.

[Default Gateway]: The default setting is <192.168.0.1>.

Set the IP address, subnet mask, and default gateway with the correct combination.

For details about DHCP settings or settings of a fixed IP address, contact the administrator of the network you are using.

If you changed the setting of [IP Address Setting (LAN)], turn the camera off and then on again.

[Wi-Fi Password]

You can use a password to connect for enhanced security. (Using Password Authentication to Connect)

[LAN / Wi-Fi Function Lock]

To prevent incorrect operation and use of the wired LAN / Wi-Fi function by a third party and to protect personal information in the camera and included with images, protect the wired LAN / Wi-Fi function with a password.

[Setup]: Enter any 4-digit numbers as the password.

For information on how to enter characters (Entering Characters)

[Cancel]: Cancel the password.

Once a password is set, you are required to enter it each time you use the wired LAN / Wi-Fi function.

If you forget your password, you can use [Reset] in the [Setup] ([Setting]) menu to reset the network settings and thereby reset the password.

[Network Address Display (LAN)]

Displays the MAC address and IP address of the camera during wired LAN connection.

[Network Address Display (Wi-Fi)]

Displays the MAC address and IP address of the camera during Wi-Fi connection.