Panasonic

Synchro Scan Functions Added

Synchro Scan Functions have been added.


character_bullet-largeSynchro scan shutter speed

character_bullet-largeMulti manual function added

character_bullet-largeMenu Items Added


Synchro scan shutter speed

Fine-adjusting the shutter speed will minimize flickering and horizontal bars in images.


image_gui_shutter-synchro

(A) Synchro scan shutter speed

  1. Switch to manual mode with the <AUTO/MANU> switch.

  1. Press the <SHUTTER> button to switch to manual shutter mode.

The shutter speed display is highlighted in orange.

  1. Select [SCENE FILE] menu character_arrow [SYNC SCAN] character_arrow [ON].

  1. Adjust the Synchro Scan setting by rotating the multidial.

To minimize flickering and horizontal bands, look at the screen while adjusting the shutter speed.

  1. Press the multidial.

The setting changes to the value displayed and exits.

Press the <EXIT> button to exit without changing the setting.

bullet02The set shutter speed will also be applied to the [SCENE FILE] menu character_arrow [SYNC SCAN SETTING] menu setting.


bullet02When extremely bright subjects are recorded or when recording is performed inside under lights, there may be changes in the color hue and brightness of the screen, with horizontal bands appearing on the screen. Do the following if this occurs:

– Switch to auto shutter mode.

– Adjust the shutter speed to 1/50, 1/60, or 1/100.

– Adjusting with the synchro scan shutter speed


Multi manual function added

[imageicon_operation_icon SYNCHRO] is now available with the multi manual function.

It is possible to switch to [imageicon_operation_icon SYNCHRO] with a multidial operation by making the following setting. (character_referenceMulti manual function)

bullet02Set to manual shutter mode and set [SYNC SCAN] to [ON].


Menu Items Added

character_diamond[SCENE FILE] menu


bullet02[SYNC SCAN] and [SYNC SCAN SETTING] menu settings can be saved in a selected scene file ([F1:] to [F6:]).


[SYNC SCAN]

Sets enable/disable of the synchro scan shutter.

The items that can be set are as follows.

character_bullet-large[ON], [OFF]


[SYNC SCAN SETTING]

Displays the speed of the synchro scan shutter that is used when shooting video for television etc.

The items that can be set are as follows.

Frame rate of the recording format

Setting value

59.94p/59.94i

[1/60.0]…[1/250.0]

29.97p

[1/30.0]…[1/250.0]

23.98p

[1/24.0]…[1/250.0]

50.00p/50.00i

[1/50.0]…[1/250.0]

25.00p

[1/25.0]…[1/250.0]


bullet02This can be set when all of the following conditions are fulfilled:

– When the <AUTO/MANU> switch is set to <MANU>

– When the manual shutter mode is set

– When the [SCENE FILE] menu character_arrow [SYNC SCAN] character_arrow [ON] is set

– Flash band compensation function is disabled