Tethered Recording

If you install the “LUMIX Tether” camera control software on your PC, you can connect the camera to the PC via USB and then control the camera from the PC and record while checking the live view on the PC screen (tethered recording).

In addition, you can output via HDMI to an external monitor or TV during tethered recording.

Installing Software

character_diamond “LUMIX Tether”

This software is for controlling the camera from a PC.

It allows you to change various settings and to record remotely and then save the images to the PC.

Check the following site and then download and install the software:

https://panasonic.jp/support/global/cs/soft/download/d_lumixtether.html

(English only)

Operating environment

Supported OS

Windows: Windows 11, Windows 10 (64 bit)

Mac: macOS 10.15.3 to 10.15.7, 11.0 to 11.6, 12.0 to 12.5

Interface

USB port (SuperSpeed USB (USB 3.1))

icon_info_s

Supported OSs are current as of January 2023 and are subject to change.

To download the software, your PC needs to be able to connect to the internet.

For how to operate the software, refer to the operation guide for “LUMIX Tether”.

Operating the Camera from a PC

Getting started:

Turn on the camera and PC.

Install “LUMIX Tether” on PC.

Connect the camera and PC with the USB connection cable. (USB port)

Press to select [PC(Tether)] and then press or .

[ icon_usb-remoto ] is displayed on the camera’s screen.

Use “LUMIX Tether” to operate the camera from the PC.

icon_hints_s

If [USB Mode] is set to [PC(Tether)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the PC without the [USB Mode] selection screen being displayed. ( character_reference [USB Mode])

icon_info_s

The Wi-Fi/Bluetooth functions are not available while there is a PC connection with [PC(Tether)].