Playing back USB devices

 

1Insert the USB device.

When inserting a media item, ensure that it is facing the right way.

If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected equipment. For details, refer to the instructions for the connected equipment.

 

2Select the item to play and press [OK].

Repeat this procedure if necessary.

 

USB device

Contents format

MKV, MP4, MPEG2, Xvid, JPEG, AAC, FLAC, MP3, WAV, WMA, MST60 MPO

 

USB devices of up to 2 TB can be used.

This unit does not guarantee connection with all USB devices.

This unit does not support USB device charging.

FAT12, FAT16, FAT32, and NTFS file systems are supported.

This unit supports USB2.0 High Speed.

This unit can support an HDD formatted to FAT32 and NTFS.
Some types of HDD may require the use of its external power supply unit.

Slideshow

Play a slideshow of photos and adjust various settings during the playback.

 

Select an item and press the green button.

The following items can be set.

 

Start Slideshow	Start the slideshow. You can display still pictures in the selected folder one by one at a constant interval.
Interval	Change the display interval.
Transition Effect	Select the effect when sliding pictures.
Repeat Play	Set whether to repeat the slideshow.

 

It may not be possible to play the contents in some cases due to the type of media, the condition of the recording, the recording method, and how the files were created.

MKV/Xvid: Successive play is not possible.

It is not possible to play back MPEG2 videos which have been dragged and dropped or copied and pasted to the USB device.

To save on electricity, this unit is turned off automatically if there is no button operation for about 30 minutes when not playing back (such as when paused, displaying the menu, displaying still pictures, etc.).

 

Still pictures displayed as “” cannot be played back with this unit.