What you can do with this unit
Connecting to the network [X2100]/[X1600]
USB tethering connection [X2100]
Recording to the memory card
Recording in following types is possible.
(For the 
/
)
MOV recording (UHD and FHD recording)
MP4 recording (UHD and FHD recording)
AVCHD recording
Super slow recording
Simultaneous recording
Relay recording
Interval recording
Background recording
Pre-recording
Linking to external devices
Connecting to TV/monitor
Connect to a TV/monitor and output images.
When using , use a BNC cable (<SDI OUT> terminal) to connect a TV/monitor.
(A) HDMI cable
(B) (For the )
BNC cable (<SDI OUT> terminal)
(C) TV/Monitor
Use a Premium High Speed HDMI cable (Type A–Type A plug).
(For the )
It is recommended to use a double shielded BNC cable equivalent to 5C-FB.
|
When using a DVI converter, etc., to connect an HDMI cable to this unit, make sure that you connect last to the <HDMI> terminal on this unit. Connecting first to the <HDMI> terminal on this unit may cause a malfunction. |
Card reader mode
Data (files) for performing nonlinear editing on a computer are transferred.
The unit supports USB2.0.
(A) Memory card
1
(B) USB cable2
(C) Computer
-
Memory cards are optionally available. They are not supplied with the unit.
-
A USB cable is not supplied with the unit.
Use a USB cable conforming to the USB specification that is 1.5 m (approx. 4.9 feet) or less in length.
Connecting to the network [X2100]/[X1600]
/ supports the network function.
This unit is equipped with wireless LAN. It can connect to networks via wireless LAN.
(For the )
When using wired LAN, connect a USB ethernet adaptor (commercially available) to this unit, then connect a LAN cable.
Available functions
When the unit is connected to a network, the following functions are available.
Connecting to HC ROP app
You can remotely control this unit with the HC ROP app by connecting this unit with an iPhone/iPad or Android terminal via network.
Checking camera video or camera status
Camera remote control (focus, zoom, image quality settings, recording control such as start/end recording, and time code/user bits settings)
Menu Operations
Starting and stopping streaming (when the function is assigned to the USER button)
The unit supports the multi camera function, with which a camera selected from up to 8 cameras is remotely controlled from a single device.
For details about operation of the HC ROP app, refer to the online help for the app.
Streaming function
You can perform streaming of audio and video currently shot with the unit over a network (wired LAN, wireless LAN).
USB tethering connection [X2100]
Connect a USB tethering device (iPhone/iPad or Android device) to the USB terminal of the camera using the USB cable to connect the camera to the Internet using USB tethering function.
|
|