Panasonic

Basic Video Operations

icon_mode-photo_grayicon_mode-movie

icon_mode-iaicon_mode-picon_mode-aicon_mode-sicon_mode-micon_mode-creative-motionicon_mode-slow-and-quick-motion

It is possible to record video with a maximum resolution of 6K (5952×3968) on this camera.

It also supports switching of the system frequency and 2 types of recording file format; MP4 and MOV.

[icon_mode-p-motion_table] mode (Creative Video mode) and [S&Q] mode (Slow & Quick mode) are recording modes specifically for video.

In the [S&Q] mode, you can record smooth slow motion video and quick motion video by changing the frame rate.


  1. Select the recording mode.

character_bullet-largeSet the mode dial. (character_referenceSelecting the Recording Mode)

image_rec-mode_1

  1. Start recording.

character_bullet-largePress the video rec. button (A).


bullet02Release the video rec. button right after you press it.

image_motion-picture-1

  1. Stop recording.

character_bullet-largePress the video rec. button (A) again.


character_diamondScreen Displays While Video Recording

The live view angle of view changes to the angle of view for video recording, and video recording time (B) and elapsed recording time (C) are displayed.

bullet02“h” is an abbreviation for hour, “m” for minute and “s” for second.

bullet02The recording state indication (D) and card access indication (E) turn red while videos are being recorded.

gui_motion-picture


icon_hints_s

bullet02If maintaining focus on the subject is difficult during video recording with AF, press the shutter button halfway to re-adjust the focus.


character_diamondExposure Control While Video Recording

Videos will be recorded using the aperture value, shutter speed, ISO sensitivity, and Dual Native ISO settings below.

Recording mode

Aperture value/shutter speed/ISO sensitivity/Dual Native ISO setting

[iA]

The camera automatically makes the settings to suit the scene. (character_referenceTypes of Automatic Scene Detection)

[P]/[A]/[S]/[M]

The settings vary depending on the [Auto Exposure in P/A/S/M] in the [Custom] ([Image Quality]) menu. The default setting is [ON]. (character_reference[Auto Exposure in P/A/S/M])


[ON]: Records with values set automatically by the camera.

[OFF]: Records with the values set in the [P]/[A]/[S]/[M] modes.

[icon_mode-p-motion_table]/[S&Q]

Records with manually set values.


character_diamondSize Interval for Dividing Files

A new file will be created to continue recording if the continuous recording time or the file size exceeds the following conditions.

[Rec. File Format]

[Rec Quality]

Card used

File division

Continuous recording time

File size

[MP4]

[FHD]

(A)

30 minutes

4 GB

(B)

[4K]

(A)

3 hours 4 minutes

96 GB

(B)

30 minutes

4 GB

[MOV]

All

(A)

3 hours 4 minutes

192 GB

(B)

30 minutes

4 GB

(A) Using an SDXC memory card

(B) Using an SDHC memory card


icon_info_s

bullet02If an operation such as a zoom or button operation is performed during video recording, that operation sound may be recorded.

bullet02The lens operation sound (AF and image stabilizer) may be recorded to video.

bullet02If the operation sound of pressing the video rec. button to end recording bothers you, try the following:

– Record the video about 3 seconds longer, and then divide the last part of the video using [Video Divide] in the [Playback] ([Edit Image]) menu.

– Use the Shutter Remote Control (DMW-RS2: optional) for recording.

bullet02Depending on the type of card, the card access indication may appear for a while after video recording. This is not a malfunction.

bullet02Even when playback is performed on a supported device, situations may occur where image or sound quality is poor, recording information is not displayed correctly, or playback is not possible, for example.

If you experience any of these, play them back on the camera.

bullet02Video recording is not possible while you are using the following functions:

– [Time Lapse Shot]

– [Stop Motion Animation]

bullet02For information about the high temperature display

When the temperature of the camera rises, [icon_temperature-rise] appears blinking on the screen. If you continue to use the camera, a message indicating that the camera cannot be used is displayed on the screen and recording and HDMI output will be stopped. Wait for the camera to cool down and for the message indicating that the camera can be used again. When the message indicating that it can be used again is displayed, turn the camera off then on again.

icon_related-info_s

bullet02You can set the temperature during video recording at which the camera automatically stops recording:

(character_reference[Thermal Management])

bullet02You can switch the recording screen display to suit video recording just as with the [icon_mode-p-motion_table] mode:

(character_reference[Video-Priority Display])

bullet02You can display a red frame on the recording screen that indicates that video is being recorded:

(character_reference[Red REC Frame Indicator])