XLR Microphone Adaptor (Optional)

icon_mode-photo_gray icon_mode-movie icon_mode-sq_gray

icon_mode-ia icon_mode-p icon_mode-a icon_mode-s icon_mode-m

By attaching an XLR Microphone Adaptor (DMW-XLR2: optional), you can use a commercially available XLR microphone, etc., to enable superior-quality 32-bit float recording and 4-channel audio recording. ( character_reference [Sound Rec Quality], [4ch Audio Recording])

connect_xlr-adaptor

(A) Hot shoe

(B) Commercially available XLR microphone, etc.

Getting started:

Turn off the camera, and remove the hot shoe cover. ( character_reference Removing the Hot Shoe Cover)

Attach the XLR Microphone Adaptor to the hot shoe, and then turn on the camera.

Set to [ icon_mode-video ] mode. ( character_reference Photo/Video/S&Q Switch)

button_menu-set [ icon_movie ] [ icon_video-audio ] [XLR Mic Adaptor Setting]

When the XLR Microphone Adaptor is attached, [XLR Mic Adaptor Setting] automatically turns [ON].

[ON]

Records the audio of a device connected to the XLR Microphone Adaptor.

[OFF]

Records audio using the built-in microphone of the camera.

Make settings for the sound quality of the audio to be recorded in [Sound Rec Quality].

( character_reference [Sound Rec Quality])

icon_care_s

Notes Regarding the Optional XLR Microphone Adaptor DMW-XLR1

You can also use DMW-XLR1 (optional), but there are the following limitations:

The following functions cannot be used:

– [XLR] of [4ch Audio Recording]

– [96kHz/32bit] and [48kHz/32bit] ([Sound Rec Quality])

We recommend using DMW-XLR2 (optional).

icon_info_s

While an XLR Microphone Adaptor is attached, [ icon_mic-xlr-info-disp-vm ] is displayed on the screen.

When [XLR Mic Adaptor Setting] is set to [ON] and [4ch Audio Recording] is [OFF], the following settings are fixed:

– [Sound Rec Level Limiter]: [OFF]

– [Wind Noise Canceller]: [OFF]

– [Sound Output]: [REC SOUND]

When [XLR Mic Adaptor Setting] is set to [ON] and [4ch Audio Recording] is [OFF], [Sound Rec Gain Level] and [Sound Rec Level Adj.] are not available.

When the XLR Microphone Adaptor is attached, [Sound Rec Level Disp.] automatically turns [ON], and the recording level is displayed on the screen.

When the XLR Microphone Adaptor is attached, do not carry the camera by holding the XLR Microphone Adaptor. It may become detached.

If noises are recorded when using the AC adaptor, use the battery.

If you start video recording immediately after turning on the camera, a period with no sound may be recorded at the beginning.

For details, refer to the operating instructions for the XLR Microphone Adaptor.

[4ch Audio Recording]

You can record 4-channel audio by using an XLR Microphone Adaptor (DMW-XLR2: optional) to which is connected a commercially available XLR microphone, etc.

By combining a Stereo Shotgun Microphone (DMW-MS2: optional) or a Stereo Microphone (VW-VMS10: optional) instead of using the built-in microphone, it is also possible to record 4-channel 96 kHz/24-bit high-resolution audio. ( character_reference External Microphones (Optional))

Set to [] mode.

( character_reference Photo/Video/S&Q Switch)

Set [4ch Audio Recording].

button_menu-set [ icon_movie ] [ icon_video-audio ] [4ch Audio Recording]

[XLR]

Records the audio of a device connected to the XLR Microphone Adaptor to CH1/CH2/CH3/CH4.

[XLR+CAMERA]

Records the audio of a device connected to the XLR Microphone Adaptor to CH1/CH2.

The audio from the built-in microphone of the camera or the external microphone connected to the camera is recorded to CH3/CH4.

[OFF]

Records the audio of a device connected to the XLR Microphone Adaptor to CH1/CH2.

icon_info_s

When [4ch Audio Recording] is set to other than [OFF], it is displayed as [4ch] on the screen.

4-channel audio is output to external devices connected via HDMI when [4ch Audio Recording] is set to other than [OFF].

This cannot be set when [Rec. File Format] is [MP4].

This cannot be set when [XLR Mic Adaptor Setting] is [OFF].