Program AE Mode

icon_mode-photo icon_mode-movie icon_mode-sq

icon_mode-ia_gray icon_mode-p icon_mode-a_gray icon_mode-s_gray icon_mode-m_gray

In [P] mode (Program AE mode), the camera automatically sets the shutter speed and aperture value for the brightness of the subject.

You can also use Program Shift to change combinations of shutter speed and aperture values while keeping the same exposure.

Set the recording mode to [P].

Set the mode dial. ( character_reference Selecting the Recording Mode)

Press the shutter button halfway.

This displays the aperture value and shutter speed value on the recording screen.

button_shutter

If the correct exposure is not achieved, the aperture value (A) and shutter speed (B) blink red.

gui_program-expo-meter

Start recording.

Program Shift

You can change the shutter speed and aperture value combination set automatically by the camera while maintaining the same exposure.

With this, you can, for example, make the background more defocused by decreasing the aperture value or capture a moving subject more dynamically by slowing the shutter speed.

Press the shutter button halfway.

This displays the aperture value and shutter speed value on the recording screen. (Approx. 10 seconds)

Rotate or while the values are displayed.

This displays the Program Shift icon (C) on the recording screen.

gui_program-shift-expo-meter

Start recording.

Canceling Program Shift

Set the camera on/off switch to [OFF].

Rotate image_front-dial_s or image_rear-dial_s until the Program Shift icon disappears.

icon_info_s

Program Shift is not available when using the following function:

– Flash

icon_related-info_s

You can customize dial operations:

( character_reference [Dial Set.])

The recording screen can display an exposure meter indicating the relationship between aperture value and shutter speed:

( character_reference [Expo.Meter])