Panasonic

Support for Wired LAN Connection

character_bullet-largeMenu Added


It is now possible to connect to a wired network with a LAN cable by connecting a commercially available USB ethernet adaptor to the USB port on the camera.

connect_with-lan

(A) USB port

(B) USB ethernet adaptor (commercially available)

(C) LAN cable


bullet02For information about USB ethernet adaptors whose operation has been verified with this camera, check the following support site. (As of November 2021)

https://panasonic.jp/support/global/cs/dsc/connect/index.html

(English only)

bullet02For information about operation methods for streaming with the wired LAN connection

(character_referenceConnection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added)

bullet02For information about operation methods for “LUMIX Tether” with the wired LAN connection

(character_referenceSupport for “LUMIX Tether” Wired LAN Connections)


Menu Added

A menu has been added to the [Wi-Fi Setup] menu for the wired LAN connection, and the [Wi-Fi Setup] menu has become [LAN / Wi-Fi Setup].


Firmware 1.0

button_menu-set character_arrow [icon_setup-menu] character_arrow [icon_setup-inout] character_arrow [Wi-Fi] character_arrow [Wi-Fi Function]/[Wi-Fi Setup]/[Streaming Setup]character_asterisk1


Firmware 1.1

button_menu-set character_arrow [icon_setup-menu] character_arrow [icon_setup-inout] character_arrow [LAN / Wi-Fi] character_arrow [Wi-Fi Function]/[LAN / Wi-Fi Setup]


  1. The streaming setup menu has been moved by a firmware update.

button_menu-set character_arrow [icon_setup-menu] character_arrow [icon_setup-inout] character_arrow [Streaming]

(character_referenceConnection Methods for Streaming (USB Tethering, Wired LAN) Have Been Added)


[LAN / Wi-Fi Setup]

[Priority of Remote Device]

(character_reference[Priority of Remote Device])

[IP Address Setting (LAN)]

Sets the IP address when connecting via wired LAN.

You can select to either automatically allocate the IP address with the DHCP, or set any static IP address.


[DHCP Server]: Select when the camera is to be connected as the DHCP server.

[DHCP Client]: Select when the camera is to be connected as the DHCP client. (Default setting)

[Static IP Address]: Select when connecting using an IP set in [Static IP Address Setting].

[Static IP Address Setting]: Set the IP address to be used in [Static IP Address].

[IP Address]: The default setting is <192.168.0.2>.

[Subnet Mask]: The default setting is <255.255.255.0>.

[Default Gateway]: The default setting is <192.168.0.1>.

Use the correct combinations when setting the [IP Address], [Subnet Mask], and [Default Gateway].


bullet02Consult the administrator of the network you are using for detailed information about the DHCP settings and static IP address settings.

bullet02If you have modified settings in [IP Address Setting (LAN)], turn the camera off and on again.

[Wi-Fi Password]

(character_reference[Wi-Fi Password])

[PC Connection]

(character_reference[PC Connection])

[Device Name]

(character_reference[Device Name])

[LAN / Wi-Fi Function Lock]

[Wi-Fi Function Lock] has been changed to [LAN / Wi-Fi Function Lock] by the firmware update.

Along with the Wi-Fi function, use of the wired LAN function is protected by a password. (character_reference[Wi-Fi Function Lock])

[Network Address Display (LAN)]

Displays the MAC address and IP address of the camera when connecting via wired LAN.

[Network Address Display (Wi-Fi)]

Displays the MAC address and IP address of the camera when connecting via Wi-Fi.