Panasonic

Note regarding simultaneous output to the SDI OUT terminal and the HDMI terminal [X2100]

It is possible to output from both the <SDI OUT> terminal and the <HDMI> terminal to the external device at the same time.

The formats that can be output differ depending on the following setting combinations.

bullet02[SYSTEM] menu character_arrow [FREQUENCY]

bullet02[SYSTEM] menu character_arrow [FILE FORMAT]

bullet02[SYSTEM] menu character_arrow [REC FORMAT]

bullet02[VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [SDI OUT FORMAT]

bullet02[VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [HDMI OUT FORMAT]


Make the following menu setting:

bullet02[VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [SDI + HDMI OUTPUT] character_arrow [ON]


character_diamondWhen the [FREQUENCY] is set to [59.94Hz]

[REC FORMAT]

<HDMI> terminal

<SDI OUT> terminal

Resolution/frame rate

[HDMI OUT FORMAT]: output format

[SDI OUT FORMAT]: output format

3840×2160/59.94p

[3840×2160p]: 3840×2160/59.94p 4:2:2 10 bit

[3840×2160p(420/8bit)]: 3840×2160/59.94p 4:2:0 8 bit

[1920×1080p]character_asterisk: 1920×1080/59.94p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/59.94p 4:2:2 10 bit

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

3840×2160/29.97p

[3840×2160p]: 3840×2160/29.97p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/29.97p 4:2:2 10 bit

[1920×1080p]: 1920×1080/29.97p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/29.97PsF 4:2:2 10 bit

3840×2160/23.98p

[3840×2160p]: 3840×2160/23.98p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/23.98p 4:2:2 10 bit

[1920×1080p]: 1920×1080/23.98p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/23.98PsF 4:2:2 10 bit

1920×1080/59.94p

[1920×1080p]character_asterisk: 1920×1080/59.94p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/59.94p 4:2:2 10 bit

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

1920×1080/59.94i

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

1920×1080/29.97p

[1920×1080p]: 1920×1080/29.97p 4:2:2 10 bit

[1920×1080p]: 1920×1080/29.97p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/29.97PsF 4:2:2 10 bit

1920×1080/23.98p

[1920×1080p]: 1920×1080/23.98p 4:2:2 10 bit

[1920×1080p]: 1920×1080/23.98p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/23.98PsF 4:2:2 10 bit

1280×720/59.94p

[1280×720p]: 1280×720/59.94p 4:2:2 10 bit

[1280×720p]: 1280×720/59.94p 4:2:2 10 bit


character_diamondWhen the [FREQUENCY] is set to [50.00Hz]

[REC FORMAT]

<HDMI> terminal

<SDI OUT> terminal

Resolution/frame rate

[HDMI OUT FORMAT]: output format

[SDI OUT FORMAT]: output format

3840×2160/50.00p

[3840×2160p]: 3840×2160/50.00p 4:2:2 10 bit

[3840×2160p(420/8bit)]: 3840×2160/50.00p 4:2:0 8 bit

[1920×1080p]character_asterisk: 1920×1080/50.00p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/50.00p 4:2:2 10 bit

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

3840×2160/25.00p

[3840×2160p]: 3840×2160/25.00p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/25.00p 4:2:2 10 bit

[1920×1080p]: 1920×1080/25.00p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/25.00PsF 4:2:2 10 bit

1920×1080/50.00p

[1920×1080p]character_asterisk: 1920×1080/50.00p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/50.00p 4:2:2 10 bit

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

1920×1080/50.00i

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

1920×1080/25.00p

[1920×1080p]: 1920×1080/25.00p 4:2:2 10 bit

[1920×1080p]: 1920×1080/25.00p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/25.00PsF 4:2:2 10 bit

1280×720/50.00p

[1280×720p]: 1280×720/50.00p 4:2:2 10 bit

[1280×720p]: 1280×720/50.00p 4:2:2 10 bit

  1. Factory setting


bullet02There are the following limitations if [SDI + HDMI OUTPUT] is [ON]:

– [HDMI OUT FORMAT] cannot be set to [720×480p]/[720×576p].

– [SDI OUT FORMAT]/[HDMI OUT FORMAT] will have the same frame rate settings.

(Example) When [HDMI OUT FORMAT]/[SDI OUT FORMAT] is set to [1920×1080p]

If [HDMI OUT FORMAT] is set to [1920×1080i], then [SDI OUT FORMAT] will also be automatically set to [1920×1080i].

– Either one of the LCD monitor or the viewfinder only illuminates.


character_diamondTo set how to turn on/off the LCD monitor and viewfinder

Sets the display method of the LCD monitor/viewfinder when [VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [SDI + HDMI OUTPUT] character_arrow [ON].

  1. Select [VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [VF] character_arrow [VF PRIORITY] or [LCD].


[VF PRIORITY]:

When the viewfinder is closed, the LCD monitor turns on when the LCD monitor is opened.

When the viewfinder is pulled out, the viewfinder turns on and the LCD monitor turns off.


[LCD]:

The LCD monitor is turned on when the LCD monitor is extracted. The viewfinder is not turned on.



To change the setting with a USER button

You can change how to turn on/off the LCD monitor and Viewfinder by registering [VF] to a USER button.

bullet02For details about setting the USER button (character_referenceAssigning functions to the USER buttons)


  1. When the recording screen is displayed, press the USER button to which [VF] is registered.

Switches the setting each time the button is pressed.

[VF PRIORITY] icon_arrow-long2 [LCD]

bullet02The setting is also applied to the [VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [VF] menu setting.