Panasonic

[RECORDING] menu

Sets the various items in the recording function.


[FORMAT MEDIA]

Formats the memory card in the specified card slot.

All data will be deleted when the card is formatted. Save any important data to a computer, etc. (character_referenceConnection with a computer in card reader mode)

The items that can be selected are as follows.

character_bullet-large[SLOT1], [SLOT2]


[CLIP NAME]


[CAM INDEX]

Sets the CAM INDEX used for recorded MOV formatcharacter_asterisk/MP4 format file names.

Set one upper case alphabetical character. This is used as a value to be stored in the volume label of the memory card.

  1. icon_model-x2100/icon_model-x1600 supports MOV format.

The items that can be set are as follows.

character_bullet-large[A]…[Z]

(Factory setting: [A])


[NEXT CARD COUNT]

Sets the CARD COUNT used for recorded MOV formatcharacter_asterisk/MP4 format file names.

In the following cases, the setting value in [NEXT CARD COUNT] is stored in the volume label of the memory card together with the [CAM INDEX] setting value as CARD COUNT. Furthermore, after storing, the setting value increases by 1. ([001] returns after [999])

bullet02When formatted the memory card

bullet02When recorded to the memory card where CARD COUNT is not stored in the volume label

  1. icon_model-x2100/icon_model-x1600 supports MOV format.

The items that can be set are as follows.

character_bullet-large[001]…[999]

(Factory setting: [001])


[2 SLOTS FUNC.]

Sets the recording function that uses 2 memory cards.

[OFF]

Does not set.

[RELAY REC]

Sets to the relay recording. (character_referenceRelay recording)

[SIMUL REC]

Sets to the simultaneous recording. (character_referenceSimultaneous recording)

[BACKGR REC]

Sets to the background recording. (character_referenceBackground recording)

(Factory setting: [RELAY REC])


[PRE REC]

Sets whether to perform pre-recording. (character_referencePre-recording)

The items that can be selected are as follows.

character_bullet-large[ON], [OFF]

(Factory setting: [OFF])


[REC FUNCTION]


[REC MODE]

Selects the recording mode.

[NORMAL]

Performs the standard recording.

[INTERVAL]

Performs the interval recording. (character_referenceInterval recording)

(Factory setting: [NORMAL])


[INTERVAL TIME]

Sets the interval duration for interval recording.

The items that can be set are as follows.

character_bullet-large[1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]

(Factory setting: [5min])


[TC/UB]


[TC PRESET]

Sets the default value of the time code to record.

Hour

[00]…[23]

Minute

[00]…[59]

Second

[00]…[59]

Frame

[00]…[23] (when [23.98p])

[00]…[24] (when [50.00i], [50.00p], or [25.00p] is set)

[00]…[29] (when [59.94i], [59.94p], or [29.97p] is set)

(Factory setting: [00]) (each item)

bullet02“h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.


[UB PRESET]

Sets user bits.

Enabled only when [USER] is selected in [UB MODE] of [TC/UB].

Each digit can be set in following range.

character_bullet-large[00]…[FF]

(Factory setting: [00])


[FREE/REC RUN]

Sets how the time code generator advances.

[FREE RUN]

Advances regardless of the operation mode.

[REC RUN]

Advances only while recording.

(Factory setting: [REC RUN])


bullet02The setting is fixed to [REC RUN] when the [SYSTEM] menu character_arrow [SUPER SLOW] character_arrow [ON] is set.

bullet02The setting is fixed to [FREE RUN] when the [RECORDING] menu character_arrow [PRE REC] character_arrow [ON] is set.

bullet02The setting is fixed to [FREE RUN] when the [RECORDING] menu character_arrow [2 SLOTS FUNC.] character_arrow [BACKGR REC] is set.

bullet02The setting is fixed to [REC RUN] when the [RECORDING] menu character_arrow [REC FUNCTION] character_arrow [REC MODE] character_arrow [INTERVAL] is set.


[DF/NDF]

Sets the count method for the time code generator.

Enabled only when the frame rate of the [SYSTEM] menu character_arrow [REC FORMAT] is set to 59.94i/59.94p/29.97p.

[DF]

Uses the drop frame mode.

[NDF]

Uses the non-drop frame mode.

(Factory setting: [DF])


bullet02The setting is fixed to [NDF] when the [RECORDING] menu character_arrow [REC FUNCTION] character_arrow [REC MODE] character_arrow [INTERVAL] is set.


[UB MODE]

Selects the user bits mode. User bits information is recorded in the clip.

[FRAME RATE]

Selects the image information (such as frame rate) of the camera.

[USER]

Selects the user bits set in [UB PRESET].

[TIME]

Selects the local time. (hh, mm, ss)

[DATE]

Selects the local date and time. (YY, MM, DD, hh)

[TC]

Records the time code value as user bits.

[CLIP NAME]

CAM INDEX (1 character) and CARD COUNT (3-digit number) are each recorded as values converted to ASCII character codes.

Only enabled when the [SYSTEM] menu character_arrow [FILE FORMAT] character_arrow [MOV]character_asterisk or [MP4] is set.

character_asterisk Available for setting when using icon_model-x2100/icon_model-x1600

(Factory setting: [USER])


[REC COUNTER]

Sets operation of the counter for recording.

[TOTAL]

The count continues cumulatively until either you press the USER button assigned to [RESET] or touch the USER button icon.

[CLIP]

Clears the counter value at the start of recording and counts the time for each recording.

(Factory setting: [TOTAL])


[TIME STAMP]

Selects whether to superimpose the date and time on videos that are shot. The display for the year, month, and day follows the [DATE FORMAT] setting.

[OFF]

Does not superimpose the date and time.

[DATE]

Superimposes only the date.

[TIME]

Superimposes only the time.

[DATE&TIME]

Superimposes the date and time.

(Factory setting: [OFF])