[AUDIO] menu
Sets the input/output function of audio.
[HANDLE UNIT INPUT SETTING] 
/
This can be set when the handle unit ( supplied, optional) is attached to the unit.
[INPUT1 MIC LEVEL]
Sets the input level of the external microphone connected to the <INPUT 1> terminal. Enabled when the external microphone is connected and the <INPUT1> switch is set to <MIC> or <+48V>.
The items that can be set are as follows.
[−40dB], [−50dB], [−60dB]
(Factory setting: [−50dB])
[INPUT2 MIC LEVEL]
Sets the input level of the external microphone connected to the <INPUT 2> terminal. Enabled when the external microphone is connected and the <INPUT2> switch is set to <MIC> or <+48V>.
The items that can be set are as follows.
[−40dB], [−50dB], [−60dB]
(Factory setting: [−50dB])
[INPUT1 LINE LEVEL]
Sets the audio input level of the audio device connected to the <INPUT 1> terminal. Enabled when the audio device is connected and the <INPUT1> switch is set to <LINE>.
The items that can be set are as follows.
[4dB], [0dB]
(Factory setting: [0dB])
[INPUT2 LINE LEVEL]
Sets the audio input level of the audio device connected to the <INPUT 2> terminal. Enabled when the audio device is connected and the <INPUT2> switch is set to <LINE>.
The items that can be set are as follows.
[4dB], [0dB]
(Factory setting: [0dB])
[MIC SETTING]
This can be set when the handle unit ( supplied, optional) has not been attached to the unit.
[CH1 LEVEL]
Sets if the recording level adjustment method for audio channel 1 is to be automatic or manual.
The items that can be set are as follows.
[AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH2 LEVEL]
Sets if the recording level adjustment method for audio channel 2 is to be automatic or manual.
The items that can be set are as follows.
[AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH1 LEVEL CONTROL]
The recording level can be manually adjusted when [CH1 LEVEL] adjusting the recording level of the audio channel 1 is set to [MANUAL].
The items that can be set are as follows.
[MUTE], [−30dB]…[+12dB]
(Factory setting: [0dB])
[CH2 LEVEL CONTROL]
The recording level can be manually adjusted when [CH2 LEVEL] adjusting the recording level of the audio channel 2 is set to [MANUAL].
The items that can be set are as follows.
[MUTE], [−30dB]…[+12dB]
(Factory setting: [0dB])
[INPUT SETTINGS]
[CH1 MIC LOWCUT]
Switches enable/disable of the lowcut filter for audio channel 1.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[CH2 MIC LOWCUT]
Switches enable/disable of the lowcut filter for audio channel 2.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[CH1 LIMITER]
Switches enable/disable of the limiter when the method to adjust the audio input level for audio channel 1 is manual.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
|
– When [CH1 LEVEL] is set to [AUTO] – When <CH1> switch is set to <AUTO>. |
In the following case, [CH1 LIMITER] is fixed to [ON]:[CH2 LIMITER]
Switches enable/disable of the limiter when the method to adjust the audio input level for audio channel 2 is manual.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
|
– When [CH2 LEVEL] is set to [AUTO] – When <CH2> switch is set to <AUTO> |
[MIC LIMITER LINK]
Sets whether to make the limiter work on the other audio channel when the limiter works in either audio channel 1 or audio channel 2.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
|
– When the [CH1 LIMITER] or [CH2 LIMITER] is set to [OFF] |
[HEAD ROOM]
Sets the headroom (standard level).
The items that can be set are as follows.
[12dB], [18dB], [20dB]
Default setting specifications vary depending on the country or area where the camera was purchased.
[OUTPUT SETTINGS]
[AUDIO OUT]
Sets the audio channel and the format to output from the headphone terminal, and the built-in speaker.
When [AUDIO OUT] has been assigned to a USER button, [CH1]/[CH2]/[CH1/2 STEREO]/[CH1/2 MIX] switch in order with the USER button.
|
[CH1] |
Outputs the signal for audio channel 1 as monaural. |
|
[CH2] |
Outputs the signal for audio channel 2 as monaural. |
|
[CH1/2 STEREO] |
Outputs the signals of the audio channel 1 and the audio channel 2 as stereo. Outputs as monaural from the built-in speaker. |
|
[CH1/2 MIX] |
Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural. |
(Factory setting: [CH1/2 STEREO])
[ALARM]
Sets whether to have an alarm sound.
The alarm is output from the speaker of this unit or the headphones. It is not output to external output destinations.
[BATTERY END]
Sets whether to sound the alarm when the remaining battery level is exhausted.
The items that can be set are as follows.
[HIGH], [LOW], [OFF]
(Factory setting: [OFF])
[MEDIA END]
Sets whether to sound the alarm when the remaining recording capacity of the memory card is exhausted.
The items that can be set are as follows.
[HIGH], [LOW], [OFF]
(Factory setting: [OFF])
[WARNING]
Sets whether to sound the alarm when a system error or warning occurs.
The items that can be set are as follows.
[HIGH], [LOW], [OFF]
(Factory setting: [OFF])