Image Stabilizer Function Has Been Enhanced

Functionality of [E-Stabilization (Video)] has been changed.

Through the combined use of the in-lens, in-body, and electronic image stabilizers, corrections are made to camera shake on 5 axes during video recording along the vertical, horizontal, roll, pitch, and yaw axes, and to the peripheral distortion that readily occurs when you are using a wide-angle lens. (5-Axis Hybrid Image Stabilizer)

[Photo]: button_menu-set [ icon_picture ] [ icon_photo-other ] [Image Stabilizer] Select [E-Stabilization (Video)]

[Video]: button_menu-set [ icon_movie ] [ icon_video-other ] [Image Stabilizer] Select [E-Stabilization (Video)]

[HIGH]

Large shakes and peripheral distortion are corrected electronically.

The angle of view is narrower than [STANDARD].

[ icon_stabilizer-5-axis-high ] is displayed on the screen during video recording.

[STANDARD]

Shakes and peripheral distortion are corrected electronically.

The angle of view is narrower.

[ icon_stabilizer-5-axis-normal ] is displayed on the screen during video recording.

[OFF]

Turns the electronic image stabilizer (video) OFF.

There will be variation in the effectiveness of the correction depending on the video mode used for recording and the recording conditions.

Using [E-Stabilization (Video)] may cause a drop in resolution.

icon_info_s

When the following function is being used, [E-Stabilization (Video)] is not available:

– [S&Q] mode

While you are using the following functions, [HIGH] in [E-Stabilization (Video)] is not available:

– Other than [OFF] in [Anamorphic (Video)]