Panasonic

Using as a Web Camera for a PC

icon_mode-photo_grayicon_mode-movieicon_mode-sq_gray

icon_mode-iaicon_mode-picon_mode-aicon_mode-sicon_mode-m

By connecting the camera to a PC via USB, you can use the camera as a web camera.

bullet02The camera supports the UVC (USB Video Class) specification.


icon_care_s

bullet02You can connect to the following PCs:

Supported OS

Windows: Windows 10, Windows 11

Mac: macOS 14.0 to 14.7, 15.0 to 15.1

There may be cases when images are not shown properly due to the PC environment you are using. If this occurs, the situation may be corrected by changing the web camera image quality settings or changing the USB port used for connection.


Getting started:

bullet02Turn on the camera and PC.


  1. Set to [icon_mode-video] mode.

(character_referencePhoto/Video/S&Q Switch)

  1. Connect the camera and PC with the USB connection cable (commercially available).

(character_referenceUSB port)

  1. Press character_upcharacter_down to select [PC(Webcam)] and then press button_menu-set or button_joy-stick-push_s.

character_bullet-large[icon_usb-uvc] is displayed on the camera’s screen.


character_diamondSetting [Webcam Image Quality]

button_menu-set character_arrow [icon_setup-menu] character_arrow [icon_setup-inout] character_arrow [USB] character_arrow Select [Webcam Image Quality]


[Webcam Image Quality]

[System Frequency]

Resolution

Frame rate

Connected port

USB3.0

USB2.0

[4K/15p]

[59.94Hz (NTSC)]

3840×2160

14.99p

character_check-mark

[FHD/60p]

1920×1080

59.94p

character_check-mark

[FHD/30p]

1920×1080

29.97p

character_check-mark

[HD/30p]

1280×720

29.97p

character_check-mark

character_check-mark

[4K/12.5p]

[50.00Hz (PAL)]

3840×2160

12.50p

character_check-mark

[FHD/50p]

1920×1080

50.00p

character_check-mark

[FHD/25p]

1920×1080

25.00p

character_check-mark

[HD/25p]

1280×720

25.00p

character_check-mark

character_check-mark

bullet02Video format: MJPEG

bullet02Audio format: LPCM (2ch, 48 kHz/16 bit)


icon_hints_s

bullet02If [USB Mode] is set to [PC(Webcam)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the PC without the [USB Mode] selection screen being displayed. (character_reference[USB Mode])

icon_info_s

bullet02There may be some audio delay after using as a web camera for a long time.

bullet02The menu screen cannot be displayed while the camera is connected as a web camera.

bullet02When there is a PC connection with [PC(Webcam)], the following functions are not available:

– [Streaming]

– [Bluetooth]

– Viewfinder display

– HDMI output