- 14. Materials
- Lamp / Indicator Display
Shows the status of the camera with the lamp/indicator.
Status indicator (Green / Orange)
|
Lights up (Green) |
The camera is turned on. |
|
Lights up (Orange) |
Tether connect mode (Tether Connection Mode) |
|
Blinks (Green, once/sec.) |
When using PoE+ power supply. Determining PoE+. (Supplying power from a PoE+ power supply)
When using battery. Low battery (It blinks in orange when in Tether connect mode.) |
|
Blinks (Green, 4 times/sec.) |
When using PoE+ power supply. Insufficient power supply capacity
When using battery. The camera is turned off forcibly due to low battery. (It blinks in orange when in Tether connect mode.) |
|
Blinks (alternately green and orange) |
Turn the camera off and then on again since this indicates a system error. |
|
Off |
The camera is turned off. |
Front tally lamp / Rear tally lamp (Red)
|
Lights up |
During video recording. (or sending data to external devices) |
|
Blinks (Red, once/sec.) |
Low battery and card capacity. |
|
Blinks (Red, 4 times/sec.) |
Stops recording forcibly due to low battery and card capacity. |
[NETWORK] connection lamp (Blue)
|
Lights up |
Connected with a LAN cable. When Wi-Fi/Bluetooth function is ON or connected. |
|
Blinks |
When sending Tether recorded images to a PC from a camera. |
When the power is turned off and [Remote Wakeup] is set to [ON], the [NETWORK] connection lamp turns off even if the Bluetooth function is working.