The camera saves the focus position when you turn it off.

Sets the function to be assigned to the focus button of an interchangeable lens.

You can call up the assigned function by setting the focus selector switch of a compatible interchangeable lens to [Fn] and then pressing the focus button of the lens.

When [Focus Stop] is used, the focus is locked while the focus button is pressed and held.

When using an interchangeable lens that has a switch for the image stabilizer (normal/panning), [Image Stabilizer] in [Lens Fn Button Setting] is not available.

Sets the amount of movement for focusing using the focus ring. (When using supported lenses)

[NON-LINEAR]: Focus responds by accelerating according to rotation speed of the focus ring.

[LINEAR]: Focus responds at a constant amount according to the rotational angle of the focus ring. When using lenses equipped with focus clutch mechanisms, set the lens to AF and the camera to MF.

[SET]: Sets the rotational angle of the focus ring for when [LINEAR] is selected. (Angles that cannot be set with the attached lens are not displayed.)

You can set on the menu, whether or not to record the camera’s vertical orientation information during video recording.

[ON]: Records vertical orientation information. Videos recorded with the camera held vertically (Fan outlet or inlet pointed downwards) will be automatically played vertically on the PC or smartphone etc. during playback.

[OFF]: Does not record vertical orientation information.