Information Display (HDMI/SDI)

You can set the output destination of recording information or menu screen. The default setting is set to [AUTO].

 

[MENU/SET] arrow_menu [menuicon_setup] arrow_menu [menuicon_in_out] arrow_menu Select [Info Display (HDMI/SDI)]

[AUTO]

Only displays to the external device connected via HDMI. When it is not connected via HDMI, it will be displayed on the external device connected via SDI. (when [SDI Output] is [ON]).

[HDMI]

Only displays to the external device connected via HDMI.

[SDI]

Only displays to the external device connected via SDI. (when [SDI Output] is [ON]).

[OFF]

Neither will be displayed.

 

img_ch9_02

[Info Display (HDMI/SDI)] is assigned to the [Fn1] at default setting. By pressing [Fn1], you can switch the settings of [Info Display (HDMI/SDI)] in the order of [AUTO], [HDMI], [SDI], and [OFF].

–About Fn buttons (Fn Buttons)