- 13. Materials
- Lamp / Indicator Display
Shows the status of the camera with the lamp/indicator.
Status indicator (Green / Orange)
|
Lights up (Green) |
The camera is turned on. |
|
Lights up (Orange) |
Tether connect mode (Tether Connection Mode) |
|
Blinks (Green, once/sec.) |
(When using PoE+ power supply.) Determining PoE+. (Supplying power from a PoE+ power supply)
(When using battery.) Low battery (It blinks in orange when in Tether connect mode.) |
|
Blinks (Green, 4 times/sec.) |
(When using PoE+ power supply.) Insufficient power supply capacity
(When using battery.) The camera is turned off forcibly due to low battery. (It blinks in orange when in Tether connect mode.) |
|
Blinks (alternately green and orange) |
System error (Turn off the camera and then on again.) |
|
Off |
The camera is turned off. |
Front tally lamp / Rear tally lamp (Red)
|
Lights up |
During video recording. (or sending data to external devices) |
|
Blinks (Red, once/sec.) |
Low battery and card capacity. |
|
Blinks (Red, 4 times/sec.) |
Stops recording forcibly due to low battery and card capacity. |
[NETWORK] connection lamp (Blue)
|
Lights up |
After being connected with a LAN cable. When Wi-Fi/Bluetooth function is ON or connected. |
|
Blinks |
When sending Tether recorded images to a PC from a camera. |
When the power is turned off and [Remote Wakeup] is set to [ON], the [NETWORK] connection lamp turns off even if the Bluetooth function is working.