[V-Log L View Assist]

When [Photo Style] is set to [V-Log L], images output via HDMI/SDI will darken. Using [V-Log L View Assist] means you can output images with LUT data applied via HDMI/SDI.

 

[MENU/SET] arrow_menu [menuicon_custom] arrow_menu [menuicon_moniter_display] arrow_menu Select [V-Log L View Assist]

[Read LUT File]

Reads LUT data from the card.

[LUT Select]

Selects the LUT data to be applied from among the preset ([Vlog_709]) and registered LUT data.

[LUT View Assist (HDMI)]

Applies LUT data to images output over HDMI.

[LUT View Assist (SDI)]

Applies LUT data to images output over SDI.

 

Reading LUT Files

The following LUT data can be used:

–The “.vlt” format, which meets the requirements specified in the “VARICAM 3DLUT REFERENCE MANUAL Rev.1.0”

–File names consisting of up to 8 alphanumeric characters (excluding extension)

Save the LUT data with a file extension of “.vlt” in the root directory of the card (the folder opened when the card is opened on a PC).

number_k_01Insert a card on which LUT data is saved into the camera.

number_k_02Select [Read LUT File].

[MENU/SET] arrow_menu [menuicon_custom] arrow_menu [menuicon_moniter_display] arrow_menu [V-Log L View Assist] arrow_menu [Read LUT File] arrow_menu [Card Slot 1] / [Card Slot 2]

number_k_03Press sankaku_u_d to select the LUT data to read and then press [MENU/SET].

number_k_04Press sankaku_u_d to select the location to register the data, and then press [MENU/SET].

When registered items are selected, they will be overwritten.